CDS Manufacturing designed and built this inner diameter inspection machine to inspect the ID of tubular sleeves.
The operator loads parts into the bulk hopper. The bulk hopper supplies parts to the vibratory bowl feeder. The number of parts in the vibratory bowl feeder is automatically maintained. Properly oriented parts are fed to the inspection station where an attempt is made to drop a gage ball through the part using only gravity. Sensors monitor the position of the gage ball to confirm that the it has passed all the way through the part. Parts that fail inspection are gated as rejects and exit the system via the rejects output chute. Parts that pass inner diameter inspection exit the system via the good parts output chute.
|Machine Rate||30 parts per minute|
|Process Overview||Sleeves are fed from the bulk hopper to the linear vibratory feeder. Parts in the proper orientation are fed to the inspection station where a gage ball is passed through the inner diameter. Good / reject parts are gated accordingly and exit the system via their respective output chutes|
|Flexibility||Yes. With optiional adjustable tooling.|
|Optional Equipment Available||Yes. Hopper elevator, good parts counter, adjustable / change over tooling to accommodate multiple sized parts.|